Dako Autostainer Plus Manual do Utilizador descarregar pdf (Página 24)

24 Dako Autostainer Plus | User Guide

If the accessing operator is assigned a middle or low security level, the INITIALIZE button is replaced

with the CHANGE PASSWORD button. A middle or low security level does not allow access to set or

change the parameters for slide labels, Main Grid and IHC Report printing formats, cleaning schedule

or signing on new users and doctors.

NOTE: In the example above, the INITIALIZE button is displayed, indicating this user is set at high

security level.

NOTE: The software version number, current date and time, user name, security level (indicated by

asterisks), institution name, and Autostainer Plus serial number are displayed across the bottom of

this screen.

NOTE: A cleaning run is recommended after 150 slides have been processed on the Autostainer

Plus. Once the cleaning cycle is set up (see System Maintenance, section 17) this number and the

number of slides processed since the last cleaning appear in red letters. Once the instrument has

processed 150 slides, a message will prompt the user to clean the instrument.

The software allows up to 200 slides to be run between cleaning cycles. The additional 50 slides

allows for flexibility in the laboratory work flow to perform an additional run before cleaning the

instrument. If more than 200 slides have been run the instrument must be cleaned. The PROGRAM

button becomes unavailable and the software does not allow additional programming until the

instrument has gone through a cleaning cycle.

PROGRAM is used during routine operation of the Autostainer

Plus and allow access to the PROGRAMMING GRID

INITIALIZE displays the INITIZLIZE screen used to establish and

update default information for institution, staff, the

number of slides per routine cleaning cycle, the

default reagent volume and drop zone for reagent

dispense. You may also name your system or identify

your system by serial number on this screen. This

button is only displayed for high security level users.

CHANGE PASSWORD displays the CHANGE PASSWORD screen used to

edit the signed on user’s password. This button

replaces the INITIALIZE button for users with middle

and low security access.

CLEAN allows you to initiate a cleaning run. It gives a status

report on the number of slides since the last cleaning

cycle and the total number of runs and generates a

Cleaning Log.

REAGENT TRACKING allows users to monitor the total volume of each

reagent that has been used on the Autostainer Plus.

PRIME PUMP displays the PRIME PUMP screen used to flush the

intake tubing with buffer or DI water without initiating

an actual run.

HELP displays information to aid in understanding and

utilizing the features on the MAIN MENU screen.

SIGN OFF exits the Autostainer Plus program.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 120 121

Comentários a estes Manuais

Sem comentários

Dako Autostainer Plus Manual do Utilizador Página 24

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Dako Autostainer Plus